Alpha Silanes
Acetoxy Silanes
Alkoxy Silanes
Alkyl Silanes
Amino Silanes
Chloro Silanes
Epoxy Silanes
Fluoro Silanes
Isocyanate Silanes
Mecapto Silanes
Methacrylate Silanes
Oximino Silanes
Phenyl Silanes
Special Silanes
Sulfur Silanes
Thiocyanato Silanes
Ureido Silanes
Vinyl Silanes
Oligomeric Silanes

Silane | Silanes | Alkyl & Alkoxy Silanes | Surface Modifier | Hydrophobing Agents | Water Repellent

SiSiB® PC5951

Synonym: Trimethoxy isobutyl silane

Countertype of Evonik Dynasylan IBTMO, Catylen D1400, DowCorning Z-2306, Wacker IO-TRIMETHOXY
Chemical Structure

SiSiB® PC5951 is high purity, undiluted iso-butyltriethoxysilane. When diluted with an appropriate solvent, it can be used in the formulation of water repellent products. Upon proper application, the formulated product will penetrate and provide water repellency by chemically reacting with the cementitious substrate. Treated substrates are hydrophobic and retain their original appearance.

SiSiB® PC5951 is a small molecule to allow for deep penetration into the construction materials (especially concrete and reinforced concrete) surface. This material reacts with moisture in the air and in the substrate in the presence of an alkaline or acidic environment to produce hydroxyl groups. These hydroxy groups will bond with the substrate and itself to produce a hydrophobic treatment that inhibits water absorption into the substrate. An alkaline environment, such as new concrete, will catalyze the reaction and speed the formation of the hydrophobic surface.

SiSiB® PC5951 is similar to DowCorning’s Z-2306 silane, Wacker’s IO-TRIMETHOXY, Evonik Degussa’s Dynasylan IBTMO.
Typical Physical Properties
Chemical Name: iso-Butyltrimethoxysilane
CAS No.: 18395-30-7
EINECS No.: 242-272-5
Empirical Formula: C7H16O3Si
Molecular Weight: 178.30
Boiling Point: 156 °C [760mmHg]
Flash Point: 42 °C
Color and Appearance: Colorless clear liquid.
Density [25°C]: 0.93
Refractive Index [25°C]: 1.3960
Purity: Min.97.0% by GC
SiSiB® PC5951 can be used to render a wide range of surfaces and materials water repellent ( materials, fillers), especially concrete and reinforced concrete.

SiSiB® PC5951 should be diluted in solvents such as alcohols, chlorinated solvents, aliphatic solvents, and low molecular weight cyclic polydimethylsiloxane, such as SiSiB® CF1040 Fluid before use. Typical dilution levels are 40% and 20% SiSiB® PC5951 in a solvent.

Blends of the solvents can also be used. The evaporation rate of the diluted material can be modified depending on the type and concentration of the solvent. Select the proper solvent for your application, as some silane/solvent blends may darken the surface.
Methods of application include airless sprayer, roller and brush. When a brush or roller is used, repeated applications should be made until the surface remains moist for a few minutes. If an airless sprayer is used, application should continue until the substrate is thoroughly saturated. Sprayers should be fitted with solvent resistant hoses and gaskets. A test application is necessary on each surface to be treated to ensure compatibility and the desired water repellent result. Surfaces should be free of standing water, surface dirt, dust, oils, and other contaminants. The formulated SiSiB® PC5951 may be applied to damp surfaces although dry surfaces are preferred to achieve maximum penetration into the substrate.

SiSiB® PC5951 can be used as a surface modifier to generate hydrophobicity and to increase compatibility to organic non polar matrices.

SiSiB® PC5951 can be used in the production of silane crosslinking formulations.

SiSiB® PC5951 can be used as a component for the manufacture of Ziegler-Natta Catalysts.
Net weight 180Kg steel drum, for more details, please visit Packing Centre.
Technical Library
Download Technical Data Sheet Safety Data Sheet 中文

SiSiB® SILANE Selection Guide SiSiB® SILANE Cross Reference Guide